California Well Data › Humboldt County
Humboldt County, California: well depth, water level & drilling cost
✓ 4,132 DWR records · verified 2026-08-14
How deep are wells in Humboldt County, California?
The median drilled well depth in Humboldt County is 100 ft, based on 4,093 wells with recorded depths in the state DWR database. Half of all wells fall between 56 ft and 180 ft; 90% are shallower than 245 ft. Wells drilled since 2016 have a median depth of 182 ft.
How much does it cost to drill a well in Humboldt County?
Applying published per-foot rates to the local median depth of 182 ft: drilling and casing alone typically runs $4,550–$11,830; a complete system including pump, pressure tank, and hookup typically runs $10,920–$18,200. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Humboldt County — never sold elsewhere.
What is the static water level in Humboldt County?
The median static water level is 53 ft below ground surface (middle half of wells: 27 ft–100 ft), from 908 measurements.
How much water do wells in Humboldt County produce?
The median tested yield is 10 gpm (middle half: 5 gpm–20 gpm), from 1,701 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Humboldt County address — $29
Drilled depth distribution
Who drills wells in Humboldt County?
Companies by number of wells completed in this county since 2016, per filed well completion reports (California Department of Water Resources).
| Driller | Wells since 2016 |
|---|---|
| FISCH DRILLING AND PUMP INC | 454 |
| RICH WELL DRILLING & PUMP SERVICE INC | 157 |
| WATSON WELL DRILLING INC | 130 |
| VICS WELL DRILLING INC | 82 |
| BUSHNELL ENTERPRISES | 51 |
| BUSHNELL WELL DRILLING | 20 |
| GREGG DRILLING LLC | 18 |
| 3 - D DRILLING | 7 |
See every driller with wells on record in Humboldt County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.