⟁ California Well Data field records · 2026 survey

California Well Data › Kings County

Kings County, California: well depth, water level & drilling cost

✓ 8,232 DWR records · verified 2026-10-02

295 ftmedian well depth
160 ft–500 fttypical depth range
90 ftmedian static water level
300 gpmmedian yield (1,005 tests)

Pull every recorded well near a Kings County address — $49

How deep are wells in Kings County, California?

The median drilled well depth in Kings County is 295 ft, based on 6,913 wells with recorded depths in the state DWR database. Half of all wells fall between 160 ft and 500 ft; 90% are shallower than 809 ft. Wells drilled since 2016 have a median depth of 410 ft.

How much does it cost to drill a well in Kings County?

Applying published per-foot rates to the local median depth of 410 ft: drilling and casing alone typically runs $10,250–$26,650; a complete system including pump, pressure tank, and hookup typically runs $24,600–$41,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Kings County?

The median static water level is 90 ft below ground surface (middle half of wells: 22 ft–140 ft), from 2,584 measurements.

How much water do wells in Kings County produce?

The median tested yield is 300 gpm (middle half: 85 gpm–1,605 gpm), from 1,005 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 264 50–100 ft 1,035 100–150 ft 357 150–200 ft 501 200–300 ft 1,311 300–400 ft 805 400–600 ft 1,392 600+ ft 1,248

Who drills wells in Kings County?

Companies by number of wells completed in this county since 2016, per filed well completion reports (California Department of Water Resources).

DrillerWells since 2016
HAYNES & SONS WELL DRILLING LLC345
BIG RIVER DRILLING LLC222
B & B WELL DRILLING INCORPORATED91
MYERS WELL DRILLING INC66
GRABOW WELL DRILLING INC63
MYERS BROTHERS WELL DRILLING INC58
RODRIGUES PUMP COMPANY47
LAYNE CHRISTENSEN COMPANY34

See every driller with wells on record in Kings County, ranked →

Get quotes from local drillers

Looking at a specific property in Kings County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Kings County

Free. Goes to licensed drillers working Kings County.

Well records by ZIP code in Kings County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.