⟁ California Well Data field records · 2026 survey

California Well Data › San Diego County › Campo (91906)

Campo, CA (91906): well depth, water level & drilling cost

✓ 517 DWR records · San Diego County

300 ftmedian well depth
200 ft–480 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (375 tests)

Pull every recorded well near a Campo (91906) address — $49

How deep are wells in and around Campo (91906), California?

The median drilled well depth in and around Campo (91906) is 300 ft, based on 408 wells with recorded depths in the state DWR database. Half fall between 200 ft and 480 ft; 90% are shallower than 725 ft.

How much does it cost to drill a well in and around Campo (91906)?

Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Campo (91906)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–64 ft), from 102 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 18 100–150 ft 45 150–200 ft 30 200–300 ft 100 300–400 ft 74 400–600 ft 64 600+ ft 73
Looking at a specific property in Campo (91906)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Campo (91906)

Free. Goes to licensed drillers working San Diego County.

Part of San Diego County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.