California Well Data › San Diego County › Mount Laguna (91948)
Mount Laguna, CA (91948): well depth, water level & drilling cost
✓ 79 DWR records · San Diego County
Pull every recorded well near a Mount Laguna (91948) address — $49
How deep are wells in and around Mount Laguna (91948), California?
The median drilled well depth in and around Mount Laguna (91948) is 240 ft, based on 61 wells with recorded depths in the state DWR database. Half fall between 167 ft and 400 ft; 90% are shallower than 656 ft.
How much does it cost to drill a well in and around Mount Laguna (91948)?
Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Mount Laguna (91948)?
The median static water level is 65 ft below ground surface (middle half of wells: 20 ft–262 ft), from 22 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Diego County.
Part of San Diego County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.