California Well Data › San Diego County › National City (91950)
National City, CA (91950): well depth, water level & drilling cost
✓ 119 DWR records · San Diego County
Pull every recorded well near a National City (91950) address — $49
How deep are wells in and around National City (91950), California?
The median drilled well depth in and around National City (91950) is 150 ft, based on 57 wells with recorded depths in the state DWR database. Half fall between 70 ft and 300 ft; 90% are shallower than 544 ft.
How much does it cost to drill a well in and around National City (91950)?
Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around National City (91950)?
The median static water level is 24 ft below ground surface (middle half of wells: 21 ft–60 ft), from 10 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Diego County.
Part of San Diego County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.