⟁ California Well Data field records · 2026 survey

California Well Data › San Diego County › Pine Valley (91962)

Pine Valley, CA (91962): well depth, water level & drilling cost

✓ 94 DWR records · San Diego County

300 ftmedian well depth
149 ft–493 fttypical depth range
29 ftmedian static water level
40 gpmmedian yield (70 tests)

Pull every recorded well near a Pine Valley (91962) address — $49

How deep are wells in and around Pine Valley (91962), California?

The median drilled well depth in and around Pine Valley (91962) is 300 ft, based on 72 wells with recorded depths in the state DWR database. Half fall between 149 ft and 493 ft; 90% are shallower than 610 ft.

How much does it cost to drill a well in and around Pine Valley (91962)?

Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pine Valley (91962)?

The median static water level is 29 ft below ground surface (middle half of wells: 18 ft–38 ft), from 18 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 7 100–150 ft 9 150–200 ft 3 200–300 ft 12 300–400 ft 15 400–600 ft 12 600+ ft 12
Looking at a specific property in Pine Valley (91962)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pine Valley (91962)

Free. Goes to licensed drillers working San Diego County.

Part of San Diego County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.