California Well Data › San Diego County › Spring Valley (91977)
Spring Valley, CA (91977): well depth, water level & drilling cost
✓ 57 DWR records · San Diego County
Pull every recorded well near a Spring Valley (91977) address — $49
How deep are wells in and around Spring Valley (91977), California?
The median drilled well depth in and around Spring Valley (91977) is 108 ft, based on 26 wells with recorded depths in the state DWR database. Half fall between 6 ft and 224 ft; 90% are shallower than 448 ft.
How much does it cost to drill a well in and around Spring Valley (91977)?
Applying published per-foot rates to the local median depth of 108 ft: drilling and casing alone typically runs $2,700–$7,020; a complete system including pump, pressure tank, and hookup typically runs $6,480–$10,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Spring Valley (91977)?
The median static water level is 110 ft below ground surface (middle half of wells: 110 ft–110 ft), from 1 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Diego County.
Part of San Diego County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.