California Well Data › San Diego County › Borrego Springs (92004)
Borrego Springs, CA (92004): well depth, water level & drilling cost
✓ 329 DWR records · San Diego County
Pull every recorded well near a Borrego Springs (92004) address — $49
How deep are wells in and around Borrego Springs (92004), California?
The median drilled well depth in and around Borrego Springs (92004) is 496 ft, based on 296 wells with recorded depths in the state DWR database. Half fall between 300 ft and 700 ft; 90% are shallower than 801 ft.
How much does it cost to drill a well in and around Borrego Springs (92004)?
Applying published per-foot rates to the local median depth of 496 ft: drilling and casing alone typically runs $12,400–$32,240; a complete system including pump, pressure tank, and hookup typically runs $29,760–$49,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Borrego Springs (92004)?
The median static water level is 200 ft below ground surface (middle half of wells: 130 ft–272 ft), from 101 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Diego County.
Part of San Diego County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.