⟁ California Well Data field records · 2026 survey

California Well Data › San Diego County › Julian (92036)

Julian, CA (92036): well depth, water level & drilling cost

✓ 1,018 DWR records · San Diego County

305 ftmedian well depth
224 ft–424 fttypical depth range
94 ftmedian static water level
25 gpmmedian yield (833 tests)

Pull every recorded well near a Julian (92036) address — $49

How deep are wells in and around Julian (92036), California?

The median drilled well depth in and around Julian (92036) is 305 ft, based on 873 wells with recorded depths in the state DWR database. Half fall between 224 ft and 424 ft; 90% are shallower than 605 ft.

How much does it cost to drill a well in and around Julian (92036)?

Applying published per-foot rates to the local median depth of 305 ft: drilling and casing alone typically runs $7,625–$19,825; a complete system including pump, pressure tank, and hookup typically runs $18,300–$30,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Julian (92036)?

The median static water level is 94 ft below ground surface (middle half of wells: 50 ft–163 ft), from 297 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 15 100–150 ft 57 150–200 ft 71 200–300 ft 223 300–400 ft 206 400–600 ft 198 600+ ft 98
Looking at a specific property in Julian (92036)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Julian (92036)

Free. Goes to licensed drillers working San Diego County.

Part of San Diego County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.