California Well Data › San Diego County › Pauma Valley (92061)
Pauma Valley, CA (92061): well depth, water level & drilling cost
✓ 297 DWR records · San Diego County
Pull every recorded well near a Pauma Valley (92061) address — $49
How deep are wells in and around Pauma Valley (92061), California?
The median drilled well depth in and around Pauma Valley (92061) is 307 ft, based on 258 wells with recorded depths in the state DWR database. Half fall between 200 ft and 527 ft; 90% are shallower than 919 ft.
How much does it cost to drill a well in and around Pauma Valley (92061)?
Applying published per-foot rates to the local median depth of 307 ft: drilling and casing alone typically runs $7,675–$19,955; a complete system including pump, pressure tank, and hookup typically runs $18,420–$30,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Pauma Valley (92061)?
The median static water level is 100 ft below ground surface (middle half of wells: 43 ft–179 ft), from 127 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Diego County.
Part of San Diego County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.