California Well Data › Riverside County › Indian Wells (92210)
Indian Wells, CA (92210): well depth, water level & drilling cost
✓ 121 DWR records · Riverside County
Pull every recorded well near a Indian Wells (92210) address — $49
How deep are wells in and around Indian Wells (92210), California?
The median drilled well depth in and around Indian Wells (92210) is 445 ft, based on 108 wells with recorded depths in the state DWR database. Half fall between 310 ft and 592 ft; 90% are shallower than 810 ft.
How much does it cost to drill a well in and around Indian Wells (92210)?
Applying published per-foot rates to the local median depth of 445 ft: drilling and casing alone typically runs $11,125–$28,925; a complete system including pump, pressure tank, and hookup typically runs $26,700–$44,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Indian Wells (92210)?
The median static water level is 182 ft below ground surface (middle half of wells: 146 ft–213 ft), from 8 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Riverside County.
Part of Riverside County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.