California Well Data › San Bernardino County › Fort Irwin (92310)
Fort Irwin, CA (92310): well depth, water level & drilling cost
✓ 75 DWR records · San Bernardino County
Pull every recorded well near a Fort Irwin (92310) address — $49
How deep are wells in and around Fort Irwin (92310), California?
The median drilled well depth in and around Fort Irwin (92310) is 412 ft, based on 56 wells with recorded depths in the state DWR database. Half fall between 330 ft and 520 ft; 90% are shallower than 623 ft.
How much does it cost to drill a well in and around Fort Irwin (92310)?
Applying published per-foot rates to the local median depth of 412 ft: drilling and casing alone typically runs $10,300–$26,780; a complete system including pump, pressure tank, and hookup typically runs $24,720–$41,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Fort Irwin (92310)?
The median static water level is 160 ft below ground surface (middle half of wells: 106 ft–254 ft), from 22 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Bernardino County.
Part of San Bernardino County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.