California Well Data › San Bernardino County › Bloomington (92316)
Bloomington, CA (92316): well depth, water level & drilling cost
✓ 125 DWR records · San Bernardino County
Pull every recorded well near a Bloomington (92316) address — $49
How deep are wells in and around Bloomington (92316), California?
The median drilled well depth in and around Bloomington (92316) is 250 ft, based on 103 wells with recorded depths in the state DWR database. Half fall between 145 ft and 531 ft; 90% are shallower than 692 ft.
How much does it cost to drill a well in and around Bloomington (92316)?
Applying published per-foot rates to the local median depth of 250 ft: drilling and casing alone typically runs $6,250–$16,250; a complete system including pump, pressure tank, and hookup typically runs $15,000–$25,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Bloomington (92316)?
The median static water level is 170 ft below ground surface (middle half of wells: 101 ft–257 ft), from 8 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Bernardino County.
Part of San Bernardino County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.