⟁ California Well Data field records · 2026 survey

California Well Data › San Bernardino County › Redlands (92373)

Redlands, CA (92373): well depth, water level & drilling cost

✓ 226 DWR records · San Bernardino County

370 ftmedian well depth
277 ft–500 fttypical depth range
100 ftmedian static water level
50 gpmmedian yield (103 tests)

Pull every recorded well near a Redlands (92373) address — $49

How deep are wells in and around Redlands (92373), California?

The median drilled well depth in and around Redlands (92373) is 370 ft, based on 187 wells with recorded depths in the state DWR database. Half fall between 277 ft and 500 ft; 90% are shallower than 647 ft.

How much does it cost to drill a well in and around Redlands (92373)?

Applying published per-foot rates to the local median depth of 370 ft: drilling and casing alone typically runs $9,250–$24,050; a complete system including pump, pressure tank, and hookup typically runs $22,200–$37,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Redlands (92373)?

The median static water level is 100 ft below ground surface (middle half of wells: 63 ft–180 ft), from 73 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 0 100–150 ft 4 150–200 ft 11 200–300 ft 39 300–400 ft 49 400–600 ft 54 600+ ft 30
Looking at a specific property in Redlands (92373)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Redlands (92373)

Free. Goes to licensed drillers working San Bernardino County.

Part of San Bernardino County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.