⟁ California Well Data field records · 2026 survey

California Well Data › Ventura County › Simi Valley (93063)

Simi Valley, CA (93063): well depth, water level & drilling cost

✓ 169 DWR records · Ventura County

267 ftmedian well depth
143 ft–445 fttypical depth range
53 ftmedian static water level
41 gpmmedian yield (28 tests)

Pull every recorded well near a Simi Valley (93063) address — $49

How deep are wells in and around Simi Valley (93063), California?

The median drilled well depth in and around Simi Valley (93063) is 267 ft, based on 106 wells with recorded depths in the state DWR database. Half fall between 143 ft and 445 ft; 90% are shallower than 738 ft.

How much does it cost to drill a well in and around Simi Valley (93063)?

Applying published per-foot rates to the local median depth of 267 ft: drilling and casing alone typically runs $6,675–$17,355; a complete system including pump, pressure tank, and hookup typically runs $16,020–$26,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Simi Valley (93063)?

The median static water level is 53 ft below ground surface (middle half of wells: 53 ft–197 ft), from 5 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 13 100–150 ft 14 150–200 ft 13 200–300 ft 26 300–400 ft 10 400–600 ft 13 600+ ft 17
Looking at a specific property in Simi Valley (93063)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Simi Valley (93063)

Free. Goes to licensed drillers working Ventura County.

Part of Ventura County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.