California Well Data › Santa Barbara County › Santa Barbara (93105)
Santa Barbara, CA (93105): well depth, water level & drilling cost
✓ 192 DWR records · Santa Barbara County
Pull every recorded well near a Santa Barbara (93105) address — $49
How deep are wells in and around Santa Barbara (93105), California?
The median drilled well depth in and around Santa Barbara (93105) is 363 ft, based on 66 wells with recorded depths in the state DWR database. Half fall between 153 ft and 599 ft; 90% are shallower than 736 ft.
How much does it cost to drill a well in and around Santa Barbara (93105)?
Applying published per-foot rates to the local median depth of 363 ft: drilling and casing alone typically runs $9,075–$23,595; a complete system including pump, pressure tank, and hookup typically runs $21,780–$36,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Santa Barbara (93105)?
The median static water level is 87 ft below ground surface (middle half of wells: 64 ft–144 ft), from 11 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Santa Barbara County.
Part of Santa Barbara County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.