⟁ California Well Data field records · 2026 survey

California Well Data › San Luis Obispo County › Creston (93432)

Creston, CA (93432): well depth, water level & drilling cost

✓ 1,146 DWR records · San Luis Obispo County

395 ftmedian well depth
293 ft–500 fttypical depth range
97 ftmedian static water level
80 gpmmedian yield (152 tests)

Pull every recorded well near a Creston (93432) address — $49

How deep are wells in and around Creston (93432), California?

The median drilled well depth in and around Creston (93432) is 395 ft, based on 262 wells with recorded depths in the state DWR database. Half fall between 293 ft and 500 ft; 90% are shallower than 605 ft.

How much does it cost to drill a well in and around Creston (93432)?

Applying published per-foot rates to the local median depth of 395 ft: drilling and casing alone typically runs $9,875–$25,675; a complete system including pump, pressure tank, and hookup typically runs $23,700–$39,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Creston (93432)?

The median static water level is 97 ft below ground surface (middle half of wells: 48 ft–161 ft), from 228 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 8 100–150 ft 14 150–200 ft 13 200–300 ft 29 300–400 ft 65 400–600 ft 95 600+ ft 35
Looking at a specific property in Creston (93432)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Creston (93432)

Free. Goes to licensed drillers working San Luis Obispo County.

Part of San Luis Obispo County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.