⟁ California Well Data field records · 2026 survey

California Well Data › Napa County › Pope Valley (94567)

Pope Valley, CA (94567): well depth, water level & drilling cost

✓ 318 DWR records · Napa County

213 ftmedian well depth
101 ft–362 fttypical depth range
51 ftmedian static water level
10 gpmmedian yield (117 tests)

Pull every recorded well near a Pope Valley (94567) address — $49

How deep are wells in and around Pope Valley (94567), California?

The median drilled well depth in and around Pope Valley (94567) is 213 ft, based on 263 wells with recorded depths in the state DWR database. Half fall between 101 ft and 362 ft; 90% are shallower than 518 ft.

How much does it cost to drill a well in and around Pope Valley (94567)?

Applying published per-foot rates to the local median depth of 213 ft: drilling and casing alone typically runs $5,325–$13,845; a complete system including pump, pressure tank, and hookup typically runs $12,780–$21,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pope Valley (94567)?

The median static water level is 51 ft below ground surface (middle half of wells: 20 ft–100 ft), from 113 measurements.

Drilled depth distribution

0–50 ft 50 50–100 ft 12 100–150 ft 30 150–200 ft 27 200–300 ft 48 300–400 ft 41 400–600 ft 33 600+ ft 22
Looking at a specific property in Pope Valley (94567)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pope Valley (94567)

Free. Goes to licensed drillers working Napa County.

Part of Napa County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.