⟁ California Well Data field records · 2026 survey

California Well Data › San Benito County › Hollister (95024)

Hollister, CA (95024): well depth, water level & drilling cost

✓ 1,013 DWR records · San Benito County

251 ftmedian well depth
187 ft–396 fttypical depth range
60 ftmedian static water level
100 gpmmedian yield (358 tests)

Pull every recorded well near a Hollister (95024) address — $49

How deep are wells in and around Hollister (95024), California?

The median drilled well depth in and around Hollister (95024) is 251 ft, based on 795 wells with recorded depths in the state DWR database. Half fall between 187 ft and 396 ft; 90% are shallower than 580 ft.

How much does it cost to drill a well in and around Hollister (95024)?

Applying published per-foot rates to the local median depth of 251 ft: drilling and casing alone typically runs $6,275–$16,315; a complete system including pump, pressure tank, and hookup typically runs $15,060–$25,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hollister (95024)?

The median static water level is 60 ft below ground surface (middle half of wells: 40 ft–92 ft), from 451 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 26 100–150 ft 64 150–200 ft 121 200–300 ft 244 300–400 ft 134 400–600 ft 122 600+ ft 75
Looking at a specific property in Hollister (95024)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hollister (95024)

Free. Goes to licensed drillers working San Benito County.

Part of San Benito County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.