California Well Data › Santa Clara County › Morgan Hill (95038)
Morgan Hill, CA (95038): well depth, water level & drilling cost
✓ 630 DWR records · Santa Clara County
Pull every recorded well near a Morgan Hill (95038) address — $49
How deep are wells in and around Morgan Hill (95038), California?
The median drilled well depth in and around Morgan Hill (95038) is 210 ft, based on 436 wells with recorded depths in the state DWR database. Half fall between 152 ft and 285 ft; 90% are shallower than 351 ft.
How much does it cost to drill a well in and around Morgan Hill (95038)?
Applying published per-foot rates to the local median depth of 210 ft: drilling and casing alone typically runs $5,250–$13,650; a complete system including pump, pressure tank, and hookup typically runs $12,600–$21,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Morgan Hill (95038)?
The median static water level is 44 ft below ground surface (middle half of wells: 28 ft–64 ft), from 180 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Santa Clara County.
Part of Santa Clara County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.