⟁ California Well Data field records · 2026 survey

California Well Data › San Benito County › Paicines (95043)

Paicines, CA (95043): well depth, water level & drilling cost

✓ 121 DWR records · San Benito County

200 ftmedian well depth
100 ft–351 fttypical depth range
48 ftmedian static water level
30 gpmmedian yield (40 tests)

Pull every recorded well near a Paicines (95043) address — $49

How deep are wells in and around Paicines (95043), California?

The median drilled well depth in and around Paicines (95043) is 200 ft, based on 102 wells with recorded depths in the state DWR database. Half fall between 100 ft and 351 ft; 90% are shallower than 479 ft.

How much does it cost to drill a well in and around Paicines (95043)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Paicines (95043)?

The median static water level is 48 ft below ground surface (middle half of wells: 20 ft–72 ft), from 49 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 19 100–150 ft 14 150–200 ft 4 200–300 ft 23 300–400 ft 16 400–600 ft 13 600+ ft 7
Looking at a specific property in Paicines (95043)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Paicines (95043)

Free. Goes to licensed drillers working San Benito County.

Part of San Benito County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.