California Well Data › Santa Cruz County › Scotts Valley (95066)
Scotts Valley, CA (95066): well depth, water level & drilling cost
✓ 438 DWR records · Santa Cruz County
Pull every recorded well near a Scotts Valley (95066) address — $49
How deep are wells in and around Scotts Valley (95066), California?
The median drilled well depth in and around Scotts Valley (95066) is 216 ft, based on 370 wells with recorded depths in the state DWR database. Half fall between 150 ft and 315 ft; 90% are shallower than 440 ft.
How much does it cost to drill a well in and around Scotts Valley (95066)?
Applying published per-foot rates to the local median depth of 216 ft: drilling and casing alone typically runs $5,400–$14,040; a complete system including pump, pressure tank, and hookup typically runs $12,960–$21,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Scotts Valley (95066)?
The median static water level is 80 ft below ground surface (middle half of wells: 50 ft–130 ft), from 257 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Santa Cruz County.
Part of Santa Cruz County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.