California Well Data › Calaveras County › Rail Road Flat (95248)
Rail Road Flat, CA (95248): well depth, water level & drilling cost
✓ 303 DWR records · Calaveras County
Pull every recorded well near a Rail Road Flat (95248) address — $49
How deep are wells in and around Rail Road Flat (95248), California?
The median drilled well depth in and around Rail Road Flat (95248) is 260 ft, based on 225 wells with recorded depths in the state DWR database. Half fall between 180 ft and 400 ft; 90% are shallower than 503 ft.
How much does it cost to drill a well in and around Rail Road Flat (95248)?
Applying published per-foot rates to the local median depth of 260 ft: drilling and casing alone typically runs $6,500–$16,900; a complete system including pump, pressure tank, and hookup typically runs $15,600–$26,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Rail Road Flat (95248)?
The median static water level is 71 ft below ground surface (middle half of wells: 46 ft–96 ft), from 99 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Calaveras County.
Part of Calaveras County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.