California Well Data › Mendocino County › Redwood Valley (95470)
Redwood Valley, CA (95470): well depth, water level & drilling cost
✓ 1,240 DWR records · Mendocino County
Pull every recorded well near a Redwood Valley (95470) address — $49
How deep are wells in and around Redwood Valley (95470), California?
The median drilled well depth in and around Redwood Valley (95470) is 151 ft, based on 1,003 wells with recorded depths in the state DWR database. Half fall between 90 ft and 220 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in and around Redwood Valley (95470)?
Applying published per-foot rates to the local median depth of 151 ft: drilling and casing alone typically runs $3,775–$9,815; a complete system including pump, pressure tank, and hookup typically runs $9,060–$15,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Redwood Valley (95470)?
The median static water level is 33 ft below ground surface (middle half of wells: 20 ft–60 ft), from 608 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mendocino County.
Part of Mendocino County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.