California Well Data › Nevada County › Soda Springs (95728)
Soda Springs, CA (95728): well depth, water level & drilling cost
✓ 198 DWR records · Nevada County
Pull every recorded well near a Soda Springs (95728) address — $49
How deep are wells in and around Soda Springs (95728), California?
The median drilled well depth in and around Soda Springs (95728) is 300 ft, based on 140 wells with recorded depths in the state DWR database. Half fall between 150 ft and 443 ft; 90% are shallower than 601 ft.
How much does it cost to drill a well in and around Soda Springs (95728)?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Soda Springs (95728)?
The median static water level is 30 ft below ground surface (middle half of wells: 10 ft–100 ft), from 44 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Nevada County.
Part of Nevada County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.