California Well Data › Yuba County › Browns Valley (95918)
Browns Valley, CA (95918): well depth, water level & drilling cost
✓ 1,590 DWR records · Yuba County
Pull every recorded well near a Browns Valley (95918) address — $49
How deep are wells in and around Browns Valley (95918), California?
The median drilled well depth in and around Browns Valley (95918) is 270 ft, based on 1,428 wells with recorded depths in the state DWR database. Half fall between 160 ft and 400 ft; 90% are shallower than 550 ft.
How much does it cost to drill a well in and around Browns Valley (95918)?
Applying published per-foot rates to the local median depth of 270 ft: drilling and casing alone typically runs $6,750–$17,550; a complete system including pump, pressure tank, and hookup typically runs $16,200–$27,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Browns Valley (95918)?
The median static water level is 40 ft below ground surface (middle half of wells: 24 ft–79 ft), from 383 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Yuba County.
Part of Yuba County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.