⟁ California Well Data field records · 2026 survey

California Well Data › Shasta County › Cassel (96016)

Cassel, CA (96016): well depth, water level & drilling cost

✓ 200 DWR records · Shasta County

106 ftmedian well depth
60 ft–167 fttypical depth range
46 ftmedian static water level
30 gpmmedian yield (44 tests)

Pull every recorded well near a Cassel (96016) address — $49

How deep are wells in and around Cassel (96016), California?

The median drilled well depth in and around Cassel (96016) is 106 ft, based on 199 wells with recorded depths in the state DWR database. Half fall between 60 ft and 167 ft; 90% are shallower than 268 ft.

How much does it cost to drill a well in and around Cassel (96016)?

Applying published per-foot rates to the local median depth of 106 ft: drilling and casing alone typically runs $2,650–$6,890; a complete system including pump, pressure tank, and hookup typically runs $6,360–$10,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cassel (96016)?

The median static water level is 46 ft below ground surface (middle half of wells: 34 ft–91 ft), from 6 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 80 100–150 ft 43 150–200 ft 24 200–300 ft 22 300–400 ft 9 400–600 ft 8 600+ ft 1
Looking at a specific property in Cassel (96016)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cassel (96016)

Free. Goes to licensed drillers working Shasta County.

Part of Shasta County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.