California Well Data › Shasta County › Montgomery Creek (96065)
Montgomery Creek, CA (96065): well depth, water level & drilling cost
✓ 61 DWR records · Shasta County
Pull every recorded well near a Montgomery Creek (96065) address — $49
How deep are wells in and around Montgomery Creek (96065), California?
The median drilled well depth in and around Montgomery Creek (96065) is 143 ft, based on 61 wells with recorded depths in the state DWR database. Half fall between 105 ft and 200 ft; 90% are shallower than 260 ft.
How much does it cost to drill a well in and around Montgomery Creek (96065)?
Applying published per-foot rates to the local median depth of 143 ft: drilling and casing alone typically runs $3,575–$9,295; a complete system including pump, pressure tank, and hookup typically runs $8,580–$14,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Montgomery Creek (96065)?
The median static water level is 90 ft below ground surface (middle half of wells: 55 ft–125 ft), from 2 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Shasta County.
Part of Shasta County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.